How to Use Our Compliance Checklist

This paint booth regulations checklist is designed to accommodate federal regulations issued by the U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) as well as National Fire Protection Association (NFPA) standards.

Behind each listed item is a bracketed citation that directs readers to the relevant code. [29 CFR…] refers to OSHA’s general industry standards, while [NFPA…] applies to the applicable NFPA standards. While going through this checklist, it is not necessary to check every standard, though if you notice a violation we recommend reading more about it. We have also included some definitions at the end of the checklist, to help with any confusion.

Keep in mind that any violation of a listed item is a potentially serious liability and should be addressed immediately and proper compliance means satisfying every

requirement listed. Additionally, this checklist serves as a well-researched point of reference but is not intended to function as official regulatory guidelines.

Note: Bolded items may require expert opinion and consultation. While we always suggest seeking the advice of a trusted professional, bolded items indicate that we strongly recommend readers to urge on the side of caution and contract reliable experts.

The Importance of Paint Booth Regulations

Because spray paint materials are often caustic, flammable and potentially toxic to both employees and the environment, spray booths are utilized to protect operators through effective ventilation and contained exposure. Paint booth regulations exist to help ensure the proper construction, operation and maintenance of spray booths to further limit liability.

Naturally, there are a lot of regulations to consider when evaluating the efficacy of a spray booth. So many, that it can often feel overwhelming and even at times unfair for operators that lack the means to contract proper guidance. Below is an easy-to-use paint booth regulations checklist designed to help overcome some of these initial frustrations and further ensure proper compliance.

General Paint Booth Regulations

  1. Smoking and open flames should be prohibited in any spray-finishing area. [NFPA 1 and 33]

  2. Spraying and finishing areas should be posted with clearly visible signage reading “No Smoking”  [29 CFR 1910.107(g)(7)]

  3. A sufficient supply of portable fire extinguishers should be closely located near all spraying areas. Expert opinion may be required. [29 CFR 1910.107(f)(4)]

  4. Metal waste cans with self-closing lids should be provided wherever rags or waste are soaked with finishing material. Additionally, all soaked rags or waste should be deposited in metal waste cans immediately after being used. [NFPA 1 and 33]